Features
Suction Cover Feed
The A.M.S (Air Management System)ensures that each cover is accurately fed without marking. The cover is then presented automatically onto the nipping table. An illuminated line indicates to the operator the correct crease position on each cover.
Creasing
The 4 creasing tools are accurately positioned automatically from the touch screen. The optional ‘Wing’ creasing tool provides for flaps to both the front and the back of the cover.
Secure Book Production
The Dubinder DPB-500 includes sensors within the book clamp that measure each book thickness and compare the number of pages with the correct version.Incorrect books are then presented back to the operator to be corrected before binding can recommence.
Milling / Notching
A heavy duty motor and high speed steel milling and notching tool ensure that an accurate and flat spine is prepared prior to gluing. Up to 4mm can be removed from the spine when folded sections are being produced.
Glue application
The 3 glue cylinders offer pre-gluing, coating and surplus glue removal.Variable glue length is automatically controlled via the touch screen. The 2 side gluing discs automatically adjust for each book thickness, whilst a low level warning indicates to the operator when the tank needs replenishing.
Specifications
- Book thickness: Min 1 mm Max 51 mm+ cover thickness
- Book size (spine × fore-edge): Max 360 mm × 320 mm; Min 120 × 120 mm
- Cover size: Max 360 × 696 mm; Min 120 × 250 mm
- Cover weight: 80-302 gsm
- Cover Pile height: 70 mmCycling speed: 525 books/hr *
